Well-Services Platforms & Equipment
CPOE Owns 3 Jack-up Workover Units and 2 Submersible Testing Units.
- CPOE1 Jack-up Workover Rig
- CPOE 61 Jack-up Workover Rig
- CPOE 62 Jack-up Workover Rig
- CPOE 63 Jack-up Testing Rig
- CPOE 82 Submersible Testing Rig
- Stimulation Package
- Coiled Tubing Skid
- Well Testing Skid
CPOE1 Jack-up Workover Rig
| Classification | CCS |
| Delivery | 1998 |
| Max. /Min. Water Depth | 7.8m/1.8m |
| Maximum Drilling Depth | 5000m |
| Maximum VDL | 810T |
| Main Dimension | 66m×36m×4m |
| Legs | 43m×4 |
| Crane (Maximum hook load, Boom length, Number) | 35t, 32m, 2 |
| Cantilever Envelope | 6.7m×4m |
| Traveling Block Capacity(hook load) | 400mt |
| Top Drive Motors power | 700hp |
| Draw works Motors (number, power) | 1,500hp |
| Annular Preventer | SHAFFER, 5000psi |
| Ram Preventer(make &type, pressure) | SHAFFER 10000psi |
| Mud pump (number, type, power) | 3, Triplex, 1600hp |
| Accommodations | 77 persons |
CPOE 61 Jack-up Workover Rig
| Delivery | 2005 |
| Main Dimension (L×W) | 63.3m×36.6m |
| Bottom Hull (L×W) | 43m×36m |
| Max. Water depth | 25m |
| Workover capacity | 6000m |
| Leg No. | 3 |
| Leg length X diameter | 60m×φ2.7m |
| Max driving depth | 10m |
| Horizontal extension, rotary table center | ±3.5m |
| Longitudinal extension, rotary table center | 8m |
| Pipe yard area | 13m×11m |
| The max hook load | 1700KN |
| Mud pump type X No. | F-1300×2 units |
| Generator | 1200kw×2 units,405kw×1,260kw×1 |
| Oil bunker | 170m3 |
| BOP | F35-70 |
| Slop tank/kill liquid tank | 169m3/169m3 |
| Rotary table opening | 37-1/2” |
| accommodation | 75 persons, can extend to 150 |
CPOE 62 Jack-up Workover Rig
| Delivery | 2009 |
| Main Dimension (L×W) | 62.7m×40.7m |
| Bottom Hull (L×W) | 45.1m×40.7m |
| Max. Water depth | 40m |
| Workover capacity | 5500m |
| Leg No. | 3 |
| Leg length X diameter | 72m×φ3.0m |
| Max driving depth | 10m |
| Horizontal extension, rotary table center | ±3.5m |
| Longitudinal extension, rotary table center | 9.5m |
| Pipe yard area | 12m×11m |
| The max hook load | 1580KN |
| Mud pump type X No. | F-800×2 units |
| Generator | 800kw×3 units,500kw×1 units |
| Oil bunker | 181m3 |
| BOP | F35-70 |
| Slop tank/kill liquid tank | 129m3/232m3 |
| Rotary table opening | 27-1/2” |
| Accommodation | 80 persons, can extend to 130 |
CPOE 63 Jack-up Testing Rig
| Delivery | 2007 |
| Main Dimension (L×W) | 84m×35m |
| Bottom Hull (L×W) | 62m×34m |
| Max. Water depth | 20m |
| Workover capacity | 5500m |
| Leg No. | 4 |
| Leg length X diameter | 63m×φ2.8m |
| The max driving depth | 23.0m |
| Horizontal extension, rotary table center | ±3m |
| Longitudinal extension, rotary table center | 8m |
| Pipe yard area | 12.5m×11m |
| Max hook load | 1580KN |
| Mud pump type X No. | F-800×1 unit F-400×1 unit |
| Generator | 800kw×3units,240kw×1units |
| Oil bunker | 121m3×2 |
| BOP | F35-70 |
| Slop tank/kill liquid tank | 209m3/247m3 |
| Rotary table opening | 20-1/2” |
| Accommodation | 50 persons |
CPOE 82 Submersible Testing Rig
| Water depth of operation | 1.8m～9m |
| Length x Width | 63.63m×24.8m |
| Light /Load draft | 1.56m/1.65m |
| Cranes | 3t×16m×2ea 0.5t×2.5m×1ea |
| Accommodation | 20 persons |
| Self-supplying capacity | 20days |
| Liquid treatment | 300m3/d |
| Natural gas treatment | 5×104m3/d |
| Crude oil storage tank | 1300m3 |
Stimulation Package
| Main Equipment | |
| Amount horse power | 18100 HHP |
| Max displacement | 8m3/min |
| Max WP | 80 MPa |
| Max proppant delivery rate | 7m3/min |
| Proppant storage capacity | 120m3 |
| Liquid storage capacity | 1300m3 |
| Original | CHINA |
| Accessory equipment | |
| High pressure manifold | |
| Slip well head | |
| Quick release system | |
| Liquid tank | |
| Co-flex | |
Coiled Tubing Skid
| Main Equipment | |
| Rated power | 360 BHP |
| Drive mode | hydraulic |
| Injection head model | HYDRA RIG HR-635 |
| Pick up capacity | 35000 lbs |
| Push down capacity | 15000 lbs |
| Max speed | 81m/min |
| Max pressure | 10000 psi |
| BOP inner diameter | 2.56 ″ |
| Tubing size | 4500m * 1-1/2〞* 0.109〞* 13.8t 3500m * 1-1/4〞* 0.095〞* 8t |
| Origina | Hydro rig, USA |
Well Testing Skid
| EXPRO Horizontal Three-phase Separator | |
| manufacturer | EXPRO |
| General | Americans Inc. Engineering Standards & Practices |
| Size | 42” ID x 10’ - 0” seam / seam |
| Service | Sour |
| Design pressure | 1,440 psig @ 50 deg. C (122 deg. F) |
| Estimated dimensions | 19’ l x 8’ w x 9’ h |
| Capacity (Vessel at half full) | |
| Gas | 56 mmscf/d at 1,440 psig operating pressure |
| Oil | 6,960 bpd total liquid with 2.0 minute retention |
| Metering | |
| Gas | Daniels Senior Orifice Fitting (5.761” bore) c/w Barton Three pen Recorder |
| Oil | One 1” Barton Turbine Meter (205 to 2,571 BBL/D) One 2” Barton Turbine Meter (875 to 10,285 BBL/D) |
| Tubing size | 4500m * 1-1/2〞* 0.109〞* 13.8t 3500m * 1-1/4〞* 0.095〞* 8t |
| Water | One 1” Barton Turbine Meter (205 to 2,571 BBL/D) |
| Safety | One Pressure Relief Valve、One 2” Rupture Disc |